EQUIPMENT LIST


The state of the art manufacturing
facility of Grosse Tool & Machine
in Warren, Michigan consists of:
(2) Air conditioned buildings
(24,000 square feet total),
Climate controlled Inspection
Lab, and lifting capacity up to
28,000 Lbs.

 

 

 

 

 


 

VERTICAL TURRET LATHES

Cincinnati VBM 156” Swing
96” 4 Jaw Chuck, 144” Max Cut Dia
70” Max Height, 100 Hp
Newall DP7 4 Axis Readout

Bullard Cutmaster 84” Swing
74” 4 Jaw Chuck, 8” x 42” Boring Bar
5 Position Turret, Side Head
Newall Topaz 4 Axis Readout

King VTL 79.5” Swing, 62.5 Height
72” 4 Jaw Chuck, 5 Position Turret,
Side Head & Boring Head
2 Axis Mitutoyo Readout

Bullard Cutmaster 62” Swing
54” 4 Jaw Chuck, 5 Position Turret,
Side Head, 2 Axis Mitutoyo Readout

Bullard Cutmaster 56” Swing
42” 3 Jaw Chuck, 5 Position Turret,
Side Head, Newall Topaz 4 Axis Readout

Bullard Cutmaster 48” Swing
36” 4 Jaw Chuck, 5 Position Turret,
Side Head, Newall Topaz 4 Axis Readout


VERTICAL MACHINING CENTERS

4 Axis Fadal 60-30 High Torque
40 Taper 60-10000 RPM 600 IPM Rapid Travel
Heidenhain Glass Scales
15” Technara Rotary Head “A” Axis
Work Envelope X=60”, Y=30”, Z=30”

4 Axis Fadal 60-30 High Torque
40 Taper 60-10000 RPM 600 IPM Rapid Travel
Work Envelope X=60”, Y=30”, Z=30”

4 Axis Fadal 40-20 High Torque
40 Taper 60-10000 RPM 800 IPM Rapid Travel
8” Fadal Rotary Head “A” Axis
Work Envelope X=40”, Y=20”, Z=20”


CNC TURNING

Olympia V40 – Vertical Turning Center (New 2008)
Fanuc 18i-TA Control
57” Swing, 48” 4 Jaw Chuck, 750 RPM
12 Tool ATC, 54 HP, 32” Height under Tool

Pratt & Whitney 1800 Starturn
Autocon Delta 50T Controller
40” Swing 72”CC, (60”CC Cut Length) 50HP
18” Chuck w/ 4-1/8” hole through spindle

Ernault Toyoda GT 52
GE Fanuc 15T Controller
18” Swing 41” CC 50HP
15” Chuck w/ 3-7/8” hole through spindle

Cincinnati Malicron Cinturn Series 1210
Accromatic 850 30HP
10.5” Swing 43” CC
10” Chuck w/ 2-3/4” hole through spindle


ENGINE LATHES

Nardini 44” Swing x 144” CC
22 Ύ” over cross slide, steady rests up to 16” dia.
31 ½” 4 Jaw Chuck, 24 Ύ” 3 Jaw Chuck
6” Hole through Spindle

LaBlond 28” Swing x 192”CC
18 Ό” over cross slide, 9 Ύ” max. steady rest
2 Ό” hole spindle, 24” 4 Jaw Chuck
50 HP 10-1300 RPM
2 Axis Mitutoyo Readout

Monarch Superduty #31, 36” Swing x 72”CC
38” Diameter faceplate
32” 4 Jaw Chuck, 24” 3 Jaw Chuck
Steady rest(s) up to 24 ½” in diameter
24” Swing over cross slide,
3-5/8” hole through spindle
Sony Magnescale LK10 Readout 2 Axis
Taper Attachment
Hydraulic Tracer Attachment

Lodge & Shipley 38” Swing x 76”CC
8-1000 RPM Digipac 5 2 Axis Readout
Pneumatic Scan-o-matic Tracing Attachment

LaBlond Makino 38” Swing x 112”CC
48” Swing in gap, 23 ½” over cross slide
36” 4 Jaw 3” hole through spindle
Taper Attachment, Steady Rests up to 22” dia.

Monarch Model 62
24” Swing x 54”CC
Taper Attachment
Mitutoyo GML 35705W 2 Axis Readout

LaBlond Makino
19” Swing 60”CC
Mitutoyo 2 Axis Readout
Metric Threading Capabilities

Monarch Model EE 10” x 20”CC


JIG BORERS

Sip Hydroptic-8 Precision Jig Borer
With Side Head & steady rest for in-line boring.
31 ½” dia. Rotary Table
Heidenhain Scales .00002 Positioning

Pratt & Whitney Jig Bore #4E
36 x 78 Table with 48” Built-in Rotary Table
Accurite Glass Scales, Millvision 4 Axis Readout


MILLS

Shibaura Boring Mill BT 10b
72” Cross Travel 57” Height, 4” Diameter
50 Taper Spindles, 55 x 63 Built-in Rotary Table

Devlieg Boring Mill 4H-60
W/40 x 40 Rotary Table, 4” Diameter
50 Taper Spindle, 60” Cross Travel, 48” high

3 Bridgeport’s
3 HP, 9” x 48” Table 60-2800 RPM
With Accurite Millmate 2 Axis Readout


GRINDERS

Toyoda O.D. Grinder
19.7” Diameter x 72”CC

Bryant ID Grinder – 4” Spindle
35” Diameter Swing, 24” Stroke, 24” 4 Jaw Chuck

Reid #2 Surface Grinder
8 x 16 Magnetic Chuck


MISC

Avey 6 Spindle Multi-Drill & Auto Tapping
15” x 77” Table 32” Spindle Travel

Oeawa Radial Drill Model HOR-D-1500
5 HP 64 Ό” x 34” Working Area
56 Ό Spindle to Base 30-1500 RPM

Power Master Drill Press 24” x 24”
36” Spindle Travel 100-2000 RPM

Sunnen Honing System


SAWING

Marvel Series 8 20” Height
50 - 450 RPM Blade Speed
Table 33 x 84” With Extender


INSPECTION EQUIPMENT

Starrett CMM 40” x 60” Table, QCT 3D Software

Digital Height Gages - Up to 48” High

Vernier Calipers – Up to 10 Feet Long

Carbon Fiber Digital Calipers - Up to 60” Long

Micrometers – Up to 36” in Diameter

Hardness Tester’s – Portable and Handheld Units

Digital Micrometers, Bore Gages, Joe Blocks, Thread Gages,
Gage Pins, Height Gages, Etc…